Paypal for confirmed continental US buyer ONLY

 
Turbine oil inlet and outlet flanges
Made from quality 6061 T6 aluminum * Please use thread tape or paste on all threaded connections
$12.50 each
 TK028  T3 & T04 Outlet- 1/2" NPT
 TK027  T3 & T04 series Inlet- 1/8" NPT
 TK139  TD05/GT series Oulet - 1/2" NPT
 TK168  Standard T25/T28 outlet - 1/2" NPT

Braided SS Turbo oil feed line kit
Now with all steel or SS fittings for added strenght!
Teflon SS 4AN line w/ SS fittings
1/8" StreetTee fitting
BSPT adapter
Straight 4AN to 1/8" connector
With either-
Standard 90 deg 4AN adapters
or 7/16" inverted flare 4AN adapters for GT & T25/28 turbos (-GT).
* Please use thread tape or paste on all threaded connections
 
 TA004  48" line w/ std. 1/8" pipe adapter  $49.99
 TA004-GT  48" line w/ inverted flare adapter $54.99
0.063" Oil Pressure Orifice
303 SS, 1/8" male to 1/8" female NPT,
use thread sealant on all NPT connections.
$20
 
ONLY USE IF OIL PRESSURE GOES HIGHER THAN 50psi AT THE TURBO UNDER LOAD! IF THIS DOESN'T FIX OVER OILING, HAVE TURBO INSPECTED BY A TURBO REBUILDER.

Basic Turbo Drain Line Kit
Includes-
Turbo drain outlet flange (different flanges come in different kits)
10AN Silcone oil hose
2 10AN to 1/2 NPT adapters
2 SS hose clamps
* Please use thread tape or paste on all threaded connections
Need a bung to weld into your steel oil pan?
TA046 1/2" NPT Steel bung $3.99
Not sure of a good location to weld the TA046 oil return bung?
Here is an example on our 1989 240SX
 
 TA007  24" Length TK028 T3/T04 flg  $52
 TA008  24" Length TK139 TD05 & GT flg  $52
 TA044  24" Lenght TK168 T25/28  $52

 2000 deg. Gasket maker

For sealing turbo/manifold/wastegate exhaust connections, apply and let sit for 1 hr then warm engine to set. Will not burn out, cleans up with water, black in color. 3 oz tube, perfect of turbos without gaskets available.

One tube will do several turbo sets!

TA066 Turbo Cement

11.99 USD